• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Wood Burning Fires Need to Be Hot and Clean

wood burning fires (Recommended Looking at) are not just a relaxing and enchanting experience they're also a vital part of our health and wellbeing. But, they must be clean and hot to function effectively.

Green wood, or unseasoned wood, has a high moisture content which makes it difficult to ignite and burn efficiently. Kiln dried or seasoned wood has a lower moisture content, making it easier to light and maintain a flame.

Efficient Combustion

A wood fire must be hot enough to drive out water and reach temperatures that are above 540 degrees F ( The process of producing heat in secondary combustion starts at 900 degrees F (in ideal conditions). This is the first step to efficiently burning fuel and minimizing pollution and smoke that enters the flue.

It is important to note that the temperature required for secondary combustion is dependent on the type of fuel used and the conditions of the environment. Choose firewood that is well-seasoned and has less than 20% to reduce these variations.

The quantity of air that is provided to a flame will also have an important influence on its energy output and time to burn. The more oxygen that is available, the hotter the fire will burn. If the supply of air is not sufficient the wood fire produces less heat and will burn at a slower rate.

To increase the time of burning and efficiency To maximize the efficiency and time of burn, a wood stove or fireplace insert should be equipped with an adjustable air damper. The wide-open setting lets the fire to take all the oxygen it can get and will quickly exhaust the fuel supply. A fire that is contained within an area of limited size is less likely to spread.

A load of firewood that is well-dried is also vital for efficient wood burning. Wood that hasn't been dried will contain a lot of water which makes it difficult to burn. To ensure optimal performance it is recommended that you use only wood that has been seasoned that has been stored outside for six to nine month.

The BTU content of wood is a different factor to consider. For instance, white pine or spruce trees may be cheaper than eastern hardwoods such as shagbark hickory and black locust however, the BTU values of the latter are much higher, meaning they will offer more heat for the same amount of wood. It's important to take into account your heating needs and fuel costs when choosing your firewood.

Clean Burning

Wood smoke is a source of indoor wood burner air pollutants that irritate the lungs and cause respiratory distress, especially for older adults and children. These pollutants include volatile aromatic hydrocarbons (PAHs) such as benzo-a-pyrene and formaldehyde, as well as volatile organic compounds like benzene. When firewood is smuggled into the air and smolders, volatile tars like creosote can also be released.

Smoke from old, poorly designed fireplaces and wood stoves could contribute to poor outdoor air quality, making it harder to see and contributing to photochemical smog. If properly used, however, modern technology for combustion in wood stoves that burn clean and in fire places can reduce these emissions.

Stage 1 - Moisture Vaporizes As the log heats up, it releases water vapor that escapes down the chimney flue. This uses up more energy than it would had the log been seasoned to dry before burning. It also wastes energy that could be put to use warming your home.

These vapors mix in the flue with carbon particles, resulting in smoke. Smoke is among the main sources of particulate matter and smog in the air.

Fireplaces and wood stoves that use clean burn technology, if properly used, can greatly reduce this problem by burning the logs to charcoal state, which releases far less volatile gasses, and producing the majority of the energy in the log from usable heat.

Avoid using damp, sour or rotten wood to light your fire. It's more difficult to burn and creates more creosote. Don't over-load your stove with soft and thin wood such as fir or pine; it takes more energy to burn them, and they create more smoke, which can lead to chimney fires.

Use a bucket made of steel to scoop up ashes from the stove, and always wait for them to cool before handling them. Dispose of or store ashes correctly. They could ignite again if exposed to water and are hazardous in landfills. Use them in your garden or at home instead.

Properly properly storing, seasoning and burning your wood correctly will save you money on fuel and ensure that your stove is working efficiently. Cleaning your chimney on a regular basis is crucial to get rid of creosote, particulates, and other deposited matter. This can also stop chimney fires and maintain safe operation.

Safety

It's difficult to beat a warm fireplace on a cold winter night However, safety precautions should be taken. When fires are improperly built or burned, or left unattended, dangerous fumes can be released into the home, and potentially dangerous creosote accumulations can form within the chimney. These deposits can clog the flue, block airflow and cause your furnace or wood stove to run less efficiently.

Never burn treated or painted wood, household waste paper, rags, and other combustible materials in your wood-burning fireplace or stove. They could release toxic fumes like carbon dioxide and create toxic gases. Also, avoid using flammable liquids to start fires. Kerosene, gasoline and lighter fluid can increase emissions, produce toxic creosote, and even cause chimney fires.

Keep combustibles, like furniture or curtains, as well as toys, in a safe distance from your stove or fireplace. Never hang clothing near or on your fireplace with wood burning. Children should be taught that the fireplace is hot and should not be touched.

Use only seasoned wood for your fireplace or stove. The wood that is seasoned has been dried during the summer months to lessen the moisture. Wood that is wet produces more creosote and smoke, while seasoned logs burn more efficiently and cleanly. Seasoned wood is darker and has cracks along the grain's end and sounds hollow when you tap it. Keep your wood outside, neatly stacked and with the top covered, but allowing air circulation around them.

The appliances that are overloaded generate more smoke and less warmth. Overloaded fires can also generate unsafe carbon monoxide levels. If you own an older appliance that has an insulated metal liner, check the liner regularly for signs of wear and tear that could cause an explosion in the chimney.

The EPA suggests reducing the amount of smoke in your home by using dry, split, and well-seasoned contemporary wood burning stoves and building a hot fire using small pieces. Avoid soft woods such as pine. Pine is a good starter material for an open flame, but should not be used beyond that. These woods with resin and sap that when burned, releases excessive creosote inside the chimney.

Maintenance

A warm evening in front of a fireplace with wood is a wonderful option to relax during winter evenings. It is important to keep your fireplace in good condition to get the most out of it. Regularly cleaning and inspecting your fireplace is the best wood burning stove way to avoid any issues that might develop. This prevents the build-up of creosote and keeps the chimney clear for maximum efficiency.

Creosote, a dark, hard, flammable substance that develops in the flue when wood does not completely burn. When a large amount of creosote is accumulated, it can lead to chimney fires. They are the second most common cause of fires in homes across the United States. The inability of a fire to burn completely can be caused by a number of reasons such as dampers that are not properly sealed or cracks in the chimney's liner and the absence of regular cleaning and ash removal.

Creosote can build up in large amounts when wood isn't properly seasoned. Water can make up half of the weight of a wood piece. In the course of a fire, this water boils and releases heat, but it also consumes energy during the process. The water vapor that results is then condensed into creosote, or released into the air as part of the smoke.

Soot is another noxious product of burning wood. Soot is more pliable than creosote, but it can stick to the walls of your fireplace and block air flow. It could also pose a fire hazard because it is easily ignited when exposed to gasses that are combustible.

You should remove the ashes and put them in a metal ash bucket that you keep outside on a non-flammable surface. The Ash can also be used as an energy source for plants Don't forget to spread them around the yard!

Make sure you ensure that your chimney and fireplace are checked by a Regency Dealer certified. The technician will be able to look for cracks in the chimney, creosote and soot levels, a properly sealed damper and also the condition of your catalyst. If you have a two-stage fireplace that includes an air tube, the catalyst must be removed and visually checked for obstructions. Check your user manual for instructions on how to do this for the particular unit you have.